High Speed Injection Molding Machine For Thin-Wall Product

KF SERIES

KF Series Thin Wall Injection Molding Machine is specialized for thin-wall products like: food container, plastic cup, cap and so on.

PARAMETER

Clamping Force 1600~3800 (KN)

Model	KF-168V6/S6	KF-208V6/S6	KF-268V6/S6	KF-260V8/S8	KF-300S6	KF-380S8	Unit
Clamping Unit
Clamping Force	1600	2080	2580	2600	3000	3800	KN
Opening Stroke	440	490	520	520	550	580	mm
Max Daylight	940	1040	1100	1100	1150	1230	mm
Platen Size	705×705	775×755	900×850	900×850	910×910	1000×1000	mm
Bars Space	460×460	505×505	580×520	580×520	620×570	670×670	mm
Max Mold Height	500	550	580	580	600	650	mm
Min Mold Height	160	230	230	230	250	240	mm
Ejector Stroke	140	145	145	145	145	180	mm
Ejector Force	49	65	77	77	77	77	KN
Injection Unit
Screw Diameter	42	42	46	68	52	52(60)	mm
Screw L/D Ratio	22	22	22	19	22	22
Injection Pressure	190	190	189	160	188	188	Mpa
Shot Volume	201	201	299	1017	520	520	cm³
Shot Weight(PS)	179	179	267	908	379	379	g
Shot Weight(PS)	6.3	6.3	9.4	32	13.4	13.4	OZ
Injection Rate	225	225	327	418	503	628	g/s
Screw Stroke	145	145	180	280	245	245	mm
Screw Speed	300	300	300	220	300	300	rpm
Power Unit
Hydraulic Pressure	17.5	17.5	17.5	17.5	17.5	17.5	Mpa
Pump Power	22/22	22/22	37/50	37/50	31/31	40/40	KW
Heater Power	14.2	14.2	16.4	13.8	21	28.5	KW
General
Oil Tank Capacity	340	420	420	420	680	810	L
Machine Weight	4.6	7	7.5	7.5	10.5	13	Ton
Machine Size	4.8×1.35×1.8	5.5×1.4×1.75	5.6×1.4×2.1	5.7×1.4×2.1	6.7×1.9×2.2	7.1×1.9×2.2	(LxWxH)m

PLATEN DIMENSIONS