PET Preform Injection Molding Machine

PET SERIES

Powerjet PET Preform Injection Molding Machine are specialized for different sizes of PET preforms. With PET special screw, it highly increases the plasticizing speed and shot weight.

Shoot Weight – 4975g(Max)

Clamping Force – 128~680(Ton)

Motor Type – Servo Or Variable

Applications – Specialized For Different Sizes Of PET Preform

MACHINE MANUFACTURING

high speed preform injection molding machine

FEATURES

PET Special Screw

PET screw highly increases the plasticizing speed and shot weight, lowers the plasticizing temperature and AA value, also achieves better products transparency.

Energy-Saving 30%~50%

The servo motor control system can save energy by 30%~50%, while the variable pump control system can save energy by 25% ~ 45%.

Pressure Synchronization System

Optional with pressure holding and charge at the same time, which can increase the productivity by 15%~25%.

Max Shot Weight

Different models are available for the choice of customers, Max shot weight: 5000g

PARAMETER

Shot Weight:387~1108(g)

Model	PET-350V6/S6	PET-450V6/S6	PET-500V6/S6	PET-800V6/S6	PET-850V6/S6	PET-1200V6/S6
INJECTION UNIT
Screw diameter(mm)	46	52	52	60	60	67
Shot volume(cm³)	333	435	435	693	693	952
Shot weight(g)-@PS1.05	297	388	388	619	619	850
Shot weight(g)-@PET 1.3	387	506	506	806	806	1108
Shot weight(g)-@PP0.9	240	313	313	499	499	685
Screw stroke(mm)	200	205	205	245	245	270
CLAMPING UNIT
Clamping force(KN)	1280	1280	1600	1600	2000	2000
Opening stroke(mm)	350	350	440	440	490	490
Max daylight(mm)	750	750	940	940	1040	1040
Space between bars(HxV)mm	410×410	410×410	460×460	460×460	510×510	510×510
Movable platen size(HxV)mm	610×610	610×610	705x 705	705×705	775×755	775×755
Max mold height(mm)	400	400	500	500	550	550
Min mold height(mm)	145	145	160	160	230	230
Ejector stroke(mm)	100	100	145	145	160	160
Ejector force(KN)	60	60	75	75	99	99
Ejector force(KN)	36	36	55	55	77	77
Number of ejector pins	4+1	4+1	4+1	4+1	6+1	6+1
POWER UNIT
Hydraulic system pressure(Mpa)	17.5	17.5	17.5	17.5	17.5	17.5
Pump motor power(KW)	11	15	15	18.5	18.5	22
Heater power(KW)	10	12.5	12.5	15	15	16.5
Total current(A)	65/81	86.8/90	86.8/90	104.1/108	104.1/108	117.5/150
GENERAL
Oil tank capacity(L)	200	200	280	280	420	420
Machine weight(Ton)	3.6	3.6	4.5	4.9	6.4	6.4
Dimensions(LWH)mm	4.5×1.2×1.8	4.5×1.2×1.8	5.3×1.3×1.8	5.3×1.3×1.8	6.0x14x2.1	6.0x14x2.1

Shot Weight:1108~2078(g)

Model	PET-1205V6/S6	PET-1500V6/S6	PET-1505V6/S6	PET-2050V6/S6	PET2100V6/S6	PET-2105V6/S6	PET-2200V6/S6
INJECTION UNIT
Screw diameter(mm)	67	75	75	83	83	83	83
Shot volume(cm³)	952	1303	1303	1840	1840	1786	1840
Shot weight(g)-@PS1.05	850	1163	1163	1642	1642	1594	1642
Shot weight(g)-@PET 1.3	1108	1516	1516	2141	2141	2078	2141
Shot weight(g)-@PP0.9	685	938	938	1325	1325	1286	1325
Screw stroke(mm)	270	295	295	340	340	330	340
CLAMPING UNIT
Clamping force(KN)	2880	2880	3300	2880	3300	4000	3300
Opening stroke(mm)	550	550	600	550	600	710	600
Max daylight(mm)	1160	1160	1300	1160	1300	1440	1300
Space between bars(HxV)mm	610×610	610×610	670×670	610×610	670×670	740×720	670×670
Movable platen size(HxV)mm	850×850	850×850	985×985	850×850	985×985	1050×1050	985×985
Max mold height(mm)	610	610	700	610	700	730	700
Min mold height(mm)	280	280	300	280	300	300	300
Ejector stroke(mm)	175	175	175	175	180	210	180
Ejector force(KN)	111	111	184	111	184	184	184
Ejector force(KN)	77	77	115	77	115	115	115
Number of ejector pins	4+1	4+1	12+1	4+1	12+1	12+1	12+1
POWER UNIT
Hydraulic system pressure(Mpa)	17.5	17.5	17.5	17.5	17.5	17.5	17.5
Pump motor power(KW)	22	30	30	30	37	37	45
Heater power(KW)	16.5	20	20	28	28	28	28
Total current(A)	117.5/150	147.5/171	147.5/171	197/207	197/207	197/207	220
GENERAL
Oil tank capacity(L)	560	560	560	650	650	650	650
Machine weight(Ton)	8.8	8.8	10.5	9	10.6	15	10.6
Dimensions(LWH)mm	6.5×1.53×2.2	6.5×1.53×2.2	7.1×1.62×2.3	7.1×1.62×2.3	7.1×1.62×2.3	7.2×1.65×2.3	7.1×1.62×2.3

Shot Weight:2078~4975(g)

Model	PET-2205V6/S6	PET-2600V6/S6	PET-2605V6/S6	PET-3105V6/S6	PET-4500V6/S6	PET-4505VG/S6	PET-5050V6/S6
INJECTION UNIT
Screw diameter(mm)	83	90	90	95	105	105	110
Shot volume(cm³)	1786	2290	2290	2694	3897	3897	4276
Shot weight(g)-@PS1.05	1594	2044	2044	2404	3478	3478	3816
Shot weight(g)-@PET 1.3	2078	2664	2664	3134	4534	4534	4975
Shot weight(g)-@PP0.9	1286	1649	1649	1940	2806	2806	3079
Screw stroke(mm)	330	360	360	380	450	450	450
CLAMPING UNIT
Clamping force(KN)	4000	3300	4000	4000	4000	5000	6800
Opening stroke(mm)	710	600	710	710	710	830	930
Max daylight(mm)	1440	1300	1440	1540	1540	1680	1870
Space between bars(HxV)mm	740×720	670×670	740×720	740×720	740×720	820×780	930×930
Movable platen size(HxV)mm	1050×1050	985×985	1050×1050	1050×1050	1050×1050	1260×1260	1340×1340
Max mold height(mm)	730	700	730	830	830	850	940
Min mold height(mm)	300	300	300	300	300	300	350
Ejector stroke(mm)	210	180	210	210	210	220	300
Ejector force(KN)	184	184	184	184	184	289	300
Ejector force(KN)	115	115	115	115	115	201	180
Number of ejector pins	12+1	12+1	12+1	12+1	12+1	12+1	15+1
POWER UNIT
Hydraulic system pressure(Mpa)	17.5	17.5	17.5	17.5	17.5	17.5	17.5
Pump motor power(KW)	45	45	45	45	55/25+30	55	37+37
Heater power(KW)	28	36	36	36	40	40	42
Total current(A)	197/220	220/244	220/244	243.9/244	286.8	286.8	327.5
GENERAL
Oil tank capacity(L)	650	650	650	800	1000	1000	1000
Machine weight(Ton)	15	12	15	15.3	19	22	35
Dimensions(LWH)mm	7.2×1.65×2.3	7.2×2.0x2.5	7.3×2.0x2.5	7.4×1.65×2.3	9×2.05×2.3	9.3×2.1×2.3	9.5 x 2.4 x 2.5

Special For Packaging Containers

Model	PET-805V6/S6	PET-1150V6/S6
INJECTION UNIT
Screw diameter(mm)	60	67
Shot volume(cm³)	693	987
Shot weight(g)-@PS1.05	619	881
Shot weight(g)-@PET 1.3	806	1148
Shot weight(g)-@PP0.9	530	711
Screw stroke(mm)	245	280
CLAMPING UNIT
Clamping force(KN)	3300	4000
Opening stroke(mm)	600	710
Max daylight(mm)	1300	1440
Space between bars(HxV)mm	670×670	740×720
Movable platen size(HxV)mm	985×985	1050×1050
Max mold height(mm)	700	730
Min mold height(mm)	300	300
Ejector stroke(mm)	180	210
Ejector force(KN)	77	110
Ejector force(KN)	49	77
Number of ejector pins	12+1	12+1
POWER UNIT
Hydraulic system pressure(Mpa)	17.5	17.5
Pump motor power(KW)	37	55
Heater power(KW)	15	20
Total current(A)	178	200
GENERAL
Oil tank capacity(L)	630	810
Machine weight(Ton)	10.3	18
Dimensions(LWH)mm	6.8x16x2.3	7.5×1.65×2.3

Special For Long Size Preform

Model	PET-1200VH	PET-2100VH	PET-4500VH
INJECTION UNIT
Screw diameter(mm)	67	83	105
Shot volume(cm³)	952	1840	3897
Shot weight(g)-@PS1.05	850	1642	3478
Shot weight(g)-@PET 1.3	1108	2141	4534
Shot weight(g)-@PP0.9	685	1325	2806
Screw stroke(mm)	270	340	450
CLAMPING UNIT
Clamping force(KN)	2000	2000	2000
Opening stroke(mm)	900	900	900
Max daylight(mm)	1820	1820	1820
Space between bars(HxV)mm	700×700	700×700	700×700
Movable platen size(HxV)mm	470×470	470×470	470×470
Max mold height(mm)	920	920	920
Min mold height(mm)	600	600	600
Ejector stroke(mm)	180	180	180
Ejector force(KN)	77	77	77
Ejector force(KN)	–	–	–
Number of ejector pins	–	–	–
POWER UNIT
Hydraulic system pressure(Mpa)	17.5	17.5	17.5
Pump motor power(KW)	22	37	55
Heater power(KW)	16.5	28	40
Total current(A)	–	–	–
GENERAL
Oil tank capacity(L)	420	650	1000
Machine weight(Ton)	6	9	12
Dimensions(LWH)mm	6.8×1.5×2	7.5x 1.6×2	82×1.6×2

Special For High Speed Injection Molding

Model	HPET-1200V6	HPET-1500V6	HPET-2100V6	HPET-4500V6
INJECTION UNIT
Screw diameter(mm)	67	75	83	105
Shot volume(cm³)	952	1303	1840	3897
Shot weight(g)-@PS1.05	850	1163	1642	3478
Shot weight(g)-@PET 1.3	1108	1516	2141	4534
Shot weight(g)-@PP0.9	685	938	1325	2806
Screw stroke(mm)	270	295	340	450
CLAMPING UNIT
Clamping force(KN)	2000	2880	3300	4000
Opening stroke(mm)	490	550	600	710
Max daylight(mm)	1040	1160	1300	1440
Space between bars(HxV)mm	510×510	610×610	670×670	740×720
Movable platen size(HxV)mm	775×755	850×850	985×985	1050×1050
Max mold height(mm)	550	610	700	730
Min mold height(mm)	230	280	300	300
Ejector stroke(mm)	160	175	180	210
Ejector force(KN)	99	111	184	184
Ejector force(KN)	77	77	115	115
Number of ejector pins	6+1	4+1	12+1	12+1
POWER UNIT
Hydraulic system pressure(Mpa)	17.5	17.5	17.5	17.5
Pump motor power(KW)	22+22	30+30	37+37	45+55
Heater power(KW)	16.5	20	28	40
Total current(A)	157.5	220	255	320
GENERAL
Oil tank capacity(L)	650	1200	1300	1800
Machine weight(Ton)	7.2	9.5	11.3	22
Dimensions(LWH)mm	5.8×1.4×2.2	6.8×1.55×2.2	7.2×1.65×2.3	9x22x2.3

PLATEN DIMENSIONS

high speed cap injection molding machine

High-speed Injection Molding Machine

PE/PP Cap Making Machine

Clamping Force – 900~10000(KN)

Driving System – Hydraulic

Motor Type – Servo

Applications – Food And Beverage Packaging, Necessities Products, Home Appliances, Electrical Components, Automotive Parts

Learn More